Konuyu Oyla:
  • Derecelendirme: 0/5 - 0 oy
  • 1
  • 2
  • 3
  • 4
  • 5
LFS Test Patch 0.6R8 (now R18)
#1
WARNING : THIS IS A TEST

NOTE : THIS DOES NOT CONTAIN NEW TYRE PHYSICS

THIS PATCH CONTAINS A MORE ROBUST METHOD OF CONNECTING TO THE MASTER SERVER

PLEASE TEST BEFORE YOU POST


Hello Racers,

Here is a new TEST PATCH : 0.6R18

It contains some updates related to some recent changes on our servers :
- A more robust method for connecting to the master server
- Skin downloading now works with the updated website

There are significant updates to the layout editor described in a separate thread :
https://www.lfs.net/forum/thread/92152

0.6R18 is compatible with 0.6R

- You CAN connect online with 0.6R
- You CAN play replays from 0.6R

You cannot upload hotlaps made with this test patch because it is only a test patch, not an official patch.

Please back up or rename your LFS.exe from version R so you can revert to it if necessary.


Changes from 0.6R17 to 0.6R18 :

Interface :

Text message dialog now has variable width
A progress message is now displayed while converting textures
More updated translations - Thank you translators!

Layout editor :

FIX : Heading slider was not available in marshall mode
FIX : Top right and bottom right buttons sometimes overlapped

InSim :

New value PMO_MOVE_MODIFY sent in IS_AXM when adjusting objects


Changes from 0.6R16 to 0.6R17 :

InSim :

New submode values added for IS_CIM modes CIM_NORMAL and CIM_GARAGE 
FIX : IS_CIM was not output on local LFS while connected to a host

Layout editor :

Updated translations - Thank you translators!


Changes from 0.6R15 to 0.6R16 :

Layout editor :

Outline changed to line drawing which helps with object alignment
Original objects are now shown with grey lines after copy pressed
Drag select now has a minimum size to avoid accidental deselection
FIX : Heading bug after un-copying selection that had been rotated
FIX : CTRL+C un-copy cleared selection if originals were not found
FIX : Chalk objects were sometimes invisible in copied selection


Changes from 0.6R14 to 0.6R15 :

Layout editor :

An outline is now drawn around the selected objects
M key can now be used with clipboard objects (select then CTRL+C)
Multiple object rectangle select CTRL+drag with left mouse button


Changes from 0.6R13 to 0.6R14 :

Layout editor :

Place objects (O) key is now equivalent to PASTE then COPY
COPY key is now reversible so you can reselect the copied objects
FIX : Sometimes marshall type could not be selected before placing
FIX : Real world objects could still be selected after a full clear


Changes from 0.6R12 to 0.6R13 :

Layout editor :

New cut / copy / paste system replaces old duplicate / move system
PGUP and PGDN can now be used to adjust Z value of selected objects
C key now clears selected object type as well as selected objects
It is now possible to set marshall circles to have zero diameter
Objects and marshall circles can now be selected at the same time
You can hold SHIFT to keep objects selected when exiting edit mode

Interface :

Added two more translation strings to avoid misleading messages
Additional translation strings for new functions in layout editor
Clip mouse to screen is now CTRL+M as CTRL+C is now used for copy
More translations updated - Thank you translators!

InSim :

New values TTC_SEL_START and TTC_SEL_STOP for IS_TTC
New value PMO_GET_Z for IS_AXM packet to report Z values
New value PMO_SELECTION_REAL for PMOFlags with PMO_SELECTION
Simplified SubMode values for free view in IS_CIM

Misc :

New check for corrupted 3D models to avoid possible crash on load


Changes from 0.6R11 to 0.6R12 :

Interface :

New free view camera position text command /cp
/cp will copy a text camera position to the clipboard
The resulting text can be saved in a text file, forum, etc. or into
another instance of Live for Speed to reproduce.the camera position

Many translations updated - Thank you translators!

Graphics :

Slight reduction in some excessively bright driver models

InSim :

New value PMO_POSITION for IS_AXM packet to report a blank position
New packet IS_CIM reports a connection's interface / editor mode


Changes from 0.6R9 to 0.6R11 :

More informative error report for "Unknown file transfer error"
FIX : Lighting restored to most objects (to appear darker in shade)
FIX : Some objects at Blackwood looked the same e.g. ads over pits
FIX : XR front lights were plain white in the recent test patches


Changes from 0.6R8 to 0.6R9 :

Faster one time file conversion straight to DDS about 20 seconds
FIX : Multiplayer replays corrupted file error message in 0.6R8
FIX : Misleading warning messages about missing sky textures
FIX : A message about a missing file when loading Fern Bay


Changes from 0.6R7 to 0.6R8 :

More robust method for connecting to the master server
FIX : Skin downloading now works with the updated website
FIX : Rare hang while recovering from a graphics driver error
FIX : LFS logo no longer overlaps the small map or InSim buttons


Changes from 0.6R to 0.6R7 :

Textures :

PNG files are now used in the few cases where RAW files were used
Removed option to view sky in 16-bit colour
Sky now uses DDS (compressed) textures

Commands :

Improved processing of command line to be more flexible
New command /settings=X.txt - uses X.txt instead of cfg.txt
Command /settings must be the first on command line or in file
Command /mp (join local host) can now be used on the command line

Misc :

Live for Speed can now recover from a graphics driver error
Textures are no longer reloaded when changing weather (faster)
LFS starting in borderless window mode now goes to the same monitor
New option "Display LFS logo in game" (not optional in demo mode)
English file is no longer saved when LFS starts (can be deleted)

VR :

New commands to skip F8 menu /vr reset_headset and /vr use_relative


INSTALLATION INSTRUCTIONS :

A FULL version of LFS 0.6R must already be installed


To install the PATCH using the SELF EXTRACTING ARCHIVE :

1) Move or save the patch into your main LFS folder
2) Double click the patch to extract it to that folder
3) When you see "Confirm File Replace" select "Yes to All"
4) Now you can start LFS in the normal way

NOTE : You can see if the patch is correctly installed when you run
the program (LFS.exe). At the bottom of the entry screen : 0.6R18


DOWNLOADS :

IF YOU ALREADY HAVE 0.6R :
PATCH 0.6R TO 0.6R18 (SELF EXTRACTING ARCHIVE)
www.lfs.net/file_lfs.php?name=LFS_PATCH_6R_TO_6R18.exe (1.4 MB)

FOR HOSTING ONLY :
DEDICATED HOST 0.6R13 (non-graphical version for hosting only) :
www.lfs.net/file_lfs.php?name=LFS_S3_DCON_6R13.zip (1.8 MB)
Cevapla


Konu ile Alakalı Benzer Konular
Konular Yazar Yorumlar Okunma Son Yorum
  LFS Test Patch 0.6R8 (now R17) EmirhanPALA 0 212 03-05-2018, Saat: 14:51
Son Yorum: EmirhanPALA
  LFS Test Patch 0.6R8 (now R16) EmirhanPALA 0 195 02-05-2018, Saat: 22:39
Son Yorum: EmirhanPALA
  LFS Test Patch 0.6R8 (now R14) EmirhanPALA 0 254 28-04-2018, Saat: 20:48
Son Yorum: EmirhanPALA
  LFS Test Patch 0.6R8 (now R12) EmirhanPALA 0 307 13-04-2018, Saat: 11:10
Son Yorum: EmirhanPALA
  Test Patch 0.6R8 (now R11) EmirhanPALA 0 476 10-04-2018, Saat: 14:32
Son Yorum: EmirhanPALA

Hızlı Menü:


Konuyu Okuyanlar: 1 Ziyaretçi